Conference Proceedings

Peer-Reviewed Conference Proceedings

19. Ramesh, S., Eldakroury, M., Rivero, Iris V., Frank, M.C., 2017, August, “Additive Fabrication of Polylactic Acid/Ceramic Based Scaffolds for Maxillofacial Regeneration.” Solid Freeform Fabrication Symposium, Austin, Texas.

18. Slagle, M., and Rivero, Iris V., 2016, June, “Bulk Manufacture of Complex Geometry Millirod Implants and Their Degradation and Drug Delivery Characteristics.” Procedia Manufacturing.  5:  466-477.

17. Samayoa, Martin; Manogharan, Guha Prasanna; Harrysson, Ola; Cohen, Paul; Rivero, Iris, 2011, May, “The Dynamic Effects of Pneumatic Power Instruments on Machining of Bone.” Industrial Engineering Research Conference, Reno, Nevada.

16. Manogharan, Guha Prasanna; Samayoa, Martin; Harrysson, Ola; Rivero, Iris ; Cohen, Paul, 2011, May, “Effects of Dynamic Spindle Speed on Bone Surface during Machining.” Industrial Engineering Research Conference, Reno, Nevada.

15. Allaf, Rula; Swain, Shayla; Rivero, Iris V., 2010, June, “Thermal Behavior of Raw and Purified SWNT Samples: XRD Studies.” Industrial Engineering Research Conference, Cancun, Mexico.

14. Allaf, Rula M. and Rivero, Iris V., 2011, April, “Solid-state Cryomilling for Porogen Mixing and Porous Scaffold Fabrication.” 48th Annual Rocky Mountain Bioengineering Symposium, Denver, Colorado.

13. Hernandez, Rocio, and Rivero, Iris V., 2008, May, Manufacturing Process Design to Ensure the Repeatability of Nanocomposite Properties. Industrial Engineering Research Conference, Vancouver, British Columbia, Canada, IIE, CD-ROM Proceedings.

12. Hernandez, R., and Rivero, Iris V., 2007,”Manufacturing Process of SWNT-Polymer Nanocomposites: Quality and Performance in a High Volume Production.” Industrial Engineering Research Conference, Nashville, Tennese, IIE.

11. Muthya, S., Rivero, Iris V., and Hope-Weeks, L., 2006, May, Silver Nanorods in Polyaniline Nanocomposites for Superior Electrical Conductivity. Industrial Engineering Research Conference , Orlando, Florida, IIE.

10. Rajamani, K., Rivero, Iris V., and Pantoya, M., 2005, May, Material Characterization of Nano-Micro Structured Al-Ni Intermetallic Composites using Residual Stresses. Industrial Engineering Research Conference , Atlanta, Georgia, IIE.

9. Karabelchtchikova, Olga, and Rivero, Iris V., 2005, February, Investigation of Residual Stresses Superposition of D2 Dies Due to Heat Treatment and Multipass Grinding. Proceedings of the TMS Annual Meeting, EPD Congress 2005-Extraction and Processing Division, 2005, p. 175-183.

8. Rivero, Iris V., and Hsiang, Simon M., 2004, May, Characterizing the Intrinsic Variance of XRD Measurements for Grinding Processes. Industrial Engineering Research Conference, Houston, Texas, IIE CD-ROM Proceedings, invited submission.

7. Karabelchtchikova, Olga, and Rivero, Iris V., 2004, May, Surface Integrity Evaluation of D2 Steel Heat Treatment and Grinding. Industrial Engineering Research Conference, Houston, Texas, IIE, CD-ROM Proceedings.

6. Karabelchtchikova, Olga, Rivero, Iris V., and Hsiang, Simon, 2004, March, Evaluation of the Initial Residual Stress Distribution and Multipass Grinding Techniques on Final Residual Stress Distribution in D2 Steel. Proceedings of the TMS Annual Meeting, EPD Congress 2004-Extraction and Processing Division, Charlotte, North Carolina, 2004, p. 519-525.

5. Rivero, Iris V., and Ruud, Clayton O., 2003, May 18-20, “Factors of variation on XRD Measurements of Bearing Balls,” Industrial Engineering Research Conference, Portland, Oregon, IIE, CD-ROM Proceedings.

4. Rivero, Iris V., and Ruud, Clayton O., 2002, May 19-23. “Residual Stresses Patterns in 52100 Bearing steel: Strain Hardening vs. Microstructural Transformation,” Proceedings of the STLE Annual Meeting 2002, Houston, Texas.

3. Rivero, Iris V., and Ruud, Clayton O., 2001, May 20-25, “The Effect of Retained Austenite on the Fatigue Endurance of 52100 Bearing Steel,” Proceedings of the STLE Annual Meeting 2001, Orlando, Florida.

2. Rivero-Diaz, Iris, and Kim, K.J., 2000, October 18-20, “Analysis of Fuzzy Regression for Modeling Shelf Life of Gun Propellants,” Proceedings of the Army Conference on Applied Statistics 2000, Houston, Texas.

1. Rivero-Diaz, Iris V., and Lehtihet, E. Amine, 1999, May 23-24, “Process Planning Decisions and the Effect of Tool Wear in the Quality of Manufacturing Output,” Industrial Engineering Research Conference, Phoenix, Arizona, IIE, CD-ROM Proceedings ISBN 0-89806-216-0.