Conferences and Talks

At ISU:

  1. W. Shen, X. Jiang, H. Qin, “Investigation on 3D Printed Origami Structure-based Non-pneumatic Tire”, International Conference on Additive Manufacturing (ICAM 2022), Orlando, FL, October 31 – November 4, 2022
  2. L. Liu, W. Shen, Y. Jiang, X. Jiang, Z. Zhang, Q. Li, H. Qin, “Melt Pool Temperature Prediction Based on Recurrent Neural Network for Directed Energy Deposition”, ASNT 30th Research Symposium, Hilton St. Louis Frontenac, St. Louis, Missouri, June 20-23, 2022.
  3. L. Jiang, F. Liu, S. Jiang, H. Qin, “Fully-printed flexible humidity sensor based on electrohydrodynamic inkjet printing”, 31st International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2022), Detroit MI, June 19-23, 2022.
  4. X. Jiang, W. Shen, L. Jiang, H. Qin, “Effects of Particle Size Distribution and Impact Speed on Printing Quality in Direct Energy Deposition”, 50th SME North American Manufacturing Research Conference, Purdue University, West Lafayette, IN, 2022.
  5. W. Shen, M. Burnett, Z. Zhang, G. E. Okudan-Kremer, H. Qin, “Origami-inspired infill pattern for additive manufacturing”, 50th SME North American Manufacturing Research Conference, Purdue University, West Lafayette, IN, 2022.
  6. Y. Huang, L. Yu, M. Burnett, X. Shi, H. Qin, “3D printing of hydrogel-based seed planter for in-space seed nursery”, IISE Annual Conference & Expo 2022.
  7. W. Shen, X. Zhang, X. Jiang, L-H. Yeh, Z. Zhang, Q. Li, B. Li, H. Qin, “Surface Extraction from Micro-Computed Tomography Data for Additive Manufacturing”, 49th SME North American Manufacturing Research Conference, Cincinnati OH, 2021.
  8. X. Zhang, V. Suresh, W. Shen, J. Hamilton, X. Jiang, L. Yeh, Z. Zhang, B. Li, I. Rivero, H. Qin, “In-situ monitoring of Direct Energy Deposition via Structured Light System and its application in remanufacturing”, 49th SME North American Manufacturing Research Conference, Cincinnati OH, 2021.
  9. L. Jiang, P. Premaratne, Y. Huang, Z. Zhang, H. Qin, “Modeling and Experimental Validation of Droplet Generation in Electrohydrodynamic Inkjet Printing for Prediction of Printing Quality”, MSEC Manufacturing Science & Engineering Conference (MSEC 2021), Cincinnati OH, 2021
  10. Liangkui Jiang, Yanhua Huang, Xiao Zhang, Hantang Qin, “Electrohydrodynamic inkjet printing of Polydimethylsiloxane (PDMS)”, Procedia Manufacturing, 48th SME North American Manufacturing Research Conference, NAMRC 48, Ohio, USA.
  11. Karthick Manikandan, Xuepeng Jiang, Amit A. Singh, Beiwen Li, Hantang Qin, “Effects of Nozzle Geometries on 3D Printing of Clay Constructs: Quantifying Contour Deviation and Mechanical Properties”, Procedia Manufacturing, 48th SME North American Manufacturing Research Conference, NAMRC 48, Ohio, USA.
  12. Sandeep Ravi-Kumar, Liangkui Jiang, Hantang Qin, “Finite Element Method (Fem) Based Simulation of Laser Ablation: Surface Temperature and Depth Profile Evolution”, Proceedings of the ASME 2020 15th International Manufacturing Science and Engineering Conference (MSEC2020), June 22-26, 2020, Cincinnati, OH, USA.
  13. Y. Cheng, X. Shi, H. Qin, “3D printing and characterization of hydroxypropyl methylcellulose and methylcellulose for biodegradable support structures”, the 47 North American Research Conference (NAMRC 47), Erie PA, June 2019.
  14. X.Zhang, H.Qin, “Laser Ablation: a Review”, the 47 North American Research Conference (NAMRC 47), Erie PA, June 2019.
  15. X. Zhang, Y. Zheng, B. Li, H. Qin, “Surface Roughness Measurement using Structured Light System and Focus Variation System”, ASME – Manufacturing Science and Engineering Conference (MSEC 2019), Erie PA, June 2019.
  16. X.Zhang, Y.Cai, H.Qin, “A Low-Cost On-Board Sensing Device For Road Surface Condition Assessment”,  IISE Annual Conference & Expo 2019 (IISE 2019), Orlando, FL, May 18-21, 2019.
  17. X.Zhang, O.K. Gul, H.Qin, “3D Printing and Characterization of Cellulose Derivatives for Biodegradable Support Structures”,  IISE Annual Conference & Expo 2019 (IISE 2019), Orlando, FL, May 18-21, 2019.
  18. X.Zhang, H.Qin, “Surface Roughness Measurement of AM Parts Using Focus Variation and Structured Light System”, 2nd Midwest Statistical Machine Learning Colloquium, May 12,2019.
  19. H. Qin, “Introduction to additive manufacturing”, MAT E 350: Polymers and Polymer Engineering, April 2019. 
  20. X.Zhang, I.V. Rivero, H.Qin, “Low-cost Bio-printer Gantry Design and Prototyping Process Control for Future Medical Application”, Solid Free Form (SFF) 2018 conference, Austin, TX, August 2018.
  21. B. Lies, X. Zhang, H. Qin, “Machine vision assisted micro-filament detection for real-time monitoring of electrohydrodynamic inkjet printing”, The 46th North American Research Conference (NAMRC 46), Texas A&M, College Station, TX, June 18-22, 2018.
  22. R. Singh, X. Zhang, H. Qin, “Machine Vision Assisted Micro-filament Detection for Real-time Monitoring of E-jet Printing”, The 28th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2018), Columbus, OH, June 10-14, 2018.
  23. X. Zhang, H. Qin, “In-situ Quality Inspection for Micro/Nano Scale Additive Manufacturing System Based on Electrohydrodynamic Inkjet Printing Using Machine Vision”, IISE Annual Conference & Expo 2018 (IISE 2018), Orlando, FL, May 18-21, 2018.
  24. X. Zhang, H. Qin, “Effects of Geometric Variations on Mechanical Properties of Bio-scaffolds for Bone Regeneration”,  IISE Annual Conference & Expo 2018 (IISE 2018), Orlando, FL, May 18-21, 2018.
  25. H. Qin, Invited talk, “Additive Inkjet Printing”, I E 545: Rapid Prototyping and Manufacturing, March 2018.
  26. H. Qin, J. Dong, and Y-S. Lee, “Fabrication and Electrical Characterization of Multi-layer Capacitive Touch Sensors on Flexible Substrates by Additive E-Jet Printing.” 2017 ASME Manufacturing Science and Engineering Conference (MSEC 2017), Los Angeles, CA, June, 2017.

Before ISU: 

  1. H. Qin, “Rapid Prototyping of High-Resolution Capacitive Touch Sensor Based on Electrohydrodynamic Inkjet Printing for Wearable and Flexible Electronics”, 2016 ASME International Manufacturing Science and Engineering Conference (MSEC 2016), Blacksburg, VA, June 2016.
  2. H. Qin, J. Dong, Y-S. Lee, “Electrohydrodynamic Jet Printing of Silver Seeds: Micro Scale Patterning by Electroless Copper Deposition”, Proceedings of the ASME 2015 Manufacturing Science and Engineering Conference 2015, Volume 1, ISBN: 978-0-7918-5682-6.
  3. H. Qin, “Rapid Prototyping Using Conductive Ink: Micro Scale Patterning Based on E-Jet Printing and Electroless Copper Deposition”, ASME 2015 International Manufacturing Science and Engineering Conference (MSEC 2015), Charlotte, NC, June 2015.
  4. Y-S. Lee, J. Dong, H. Qin, “AC-Pulse Modulated Electrohydrodynamic (EHD) Jet Printing of Conductive Micro Silver Tracks for Micro-Manufacturing,” The 24th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM 2014), San Antonio, TX, May, 2014.
  5. J. Dong, Y-S. Lee, H. Qin, “Direct Fabrication of Highly Conductive Micro Silver Tracks Using Electrohydrodynamic Jet Printing for Sub-20 µM Micro-Manufacturing”, ASME Manufacturing Science and Engineering Conference (MSEC 2014), Detroit, MI, June 9-13, 2014.
  6. Y-S. Lee, J. Dong, H. Qin, “Modulated Drop-on-Demand E-Jet Printing of Continuous Features on Electronic Insulation Substrates”, SME North American Manufacturing Research Conference (NAMRC 2014), Detroit, MI, June 9-13, 2014.
  7. Y-S. Lee, J. Dong, H. Qin, “E-Jet Printing on Highly Insulating Substrates with AC-Pulse Modulation”, Industrial and Systems Engineering Research Conference (ISERC2014), Montreal, Canada, June 2014.

Contact Information

Dr. Hantang Qin

Department of Industrial & Manufacturing Systems Engineering
3019 Black Engineering Building
College of Engineering

Center for Nondestructive Evaluation
215A ASC II, 1915 Scholl Road

Iowa State University
Ames, IA 50011

Phone: (515) 294-1248
Email: qin@iastate.edu

Latest Tweets