Department of Industrial and Manufacturing Systems Engineering

Theses

2006

Improving Productivity and Energy Efficiency in the Heat Treatment of Steel Castings.  Brian Harwood, M.S., 2006.  (Peters).

2005

Polygon Subdivision for Pocket Machining Process Planning.  Abhijeet Makhe, M.S., 2005.  (Frank).

Schema Based Validation for Geometric Dimensioning and Tolerancing. Abhinav Anand, M.S., 2005.  (Jackman).

Automated Fixture Design for a Rapid Machining Process.  Wutthigrai Boonsuk, M.S., 2005.  (Frank).

The Effect of Foot Placement and Walker Assistance on Sit-to-Stand Transfers.  Shashank Raina, M.S., 2005.  (Patterson/Gillette).

Datavis:  A Research Work in Data Management Toolkit.  Aashish Chaudhary, M.S., 2005.  (Cruz-Neira).

Study of Menu Selection Based on Human Information Processing:  Spreading Activation Approach.  Jong Myong Choi, M.S., 2005.  (Patterson).

Measurement Error of Visual Casting Surface Inspection.  Gokcer (Mike) Daricilar, M.S., 2005.  (Peters).

2004

Classifying ELP Data. Sudhakar Chinnaswamy, M.S., 2004. (Olafsson).

Continuous Review Inventory MOdel with Options to Vary Setup Time and Production Time Per Unit. Viveck Rao, M.S., 2004. (Min).

Feasibility Study on the Use of Ethanol Produced from Corn Stover in the Fuel Industry. Vikram Sriram, M.S., 2004. (Ryan).

Reel Inventory Model for PCB Assemblies under Periodic Reviews. Sachin Sulakhe, M.S., 2004. (Min).

Evaluation of Partitioning Schemes of the Nested Partitions Method in the Context of Simulation-Based Optimization. Jagpreet Chhatwal, M.S., 2004. (Olafsson).

Simulation Based Scheduling of a Dynamic and Stochastic Flexible Manufacturing System. Rohit Jain, M.S., 2004. (Olafsson).

Application of Doo Subdivision for Planning Roughing Cuts in Five Axis Machining. Abhishek Saboo, M.S., 2004. (Narayanaswami).

2003

Using Data on Early Returns of Electronic Products to Forecast Future Availability. Suphalat Chittamvanich, M.S., 2003. (Ryan).

2002

Theory of Constraints Scheduling: A Printing Industry Case Study. Mitchell Hovland, M.S., 2002. (Meeks).

The Mechanism to Forecast Competitors' Production Costs and to Adjust a Supplier's Sealed Bid to Win a Short-Term Profit on the Margin in the Power Auction. Narong Tanawongnukul, M.S., 2002. (Jackman).

Yield Improvement in Chemical Mechanical Polishing Process Investigation of Wafer Scale. Sutee Eamkajornsiri, M.S., 2002. (Narayanaswami/Chandra).

Laser Micromachining of Biodegradable Polymers and Ceramics. Vijay Kancharla, M.S., 2002. (Chen).

Capacity Expansion With Technological Change. Nattapol Pornsalnuwat, M.S., 2002. (Ryan).

2001

Multiresolution Modeling Techniques in CAD. Ji Yan, M.S., 2001. (Narayanaswami).

Modeling, Simulation, and Fabrication of a PZT Valveless Micropump. Shifeng Li, M.S., 2001. (Chen).

Laser Micromachining and Information Discovery Using a Dual Beam Interferometry. Senthil P. Theppakuttaikomaraswamy, M.S., 2001. (Chen).

Final Assembly Sequencing of Mixed-Model Assembly Lines in a Just-In-Time Rolling Horizon Environment. Balasaptadri J. Vellore, M.S., 2001. (Ryan).

Allocating Work in Process in a Multiple Product CONWIP System. Jumpol Vorasayan, M.S., 2001. (Ryan).

Continuous Flow, Submicro-Liter Scale PCR Device for the Analysis of Plant Genomes. Wei Zheng, M.S., 2001. (Chen).

Feature Based Recognition of Incomplete CAD Models for Providing Design Assistance. Aditya Ajmera, M.S., 2001. (Narayanaswami).

Option Pricing Methods for Estimating Capacity Shortages. Dohyun Pak, M.S., 2001. (Ryan).

2000

A Geometric Modeling Approach to Virtual Package Design. Lalit Ahuja, M.S., 2000. (Narayanaswami).

A Simulation Study of the Performance of the Performance Benefits of Worker Flexibility in Production Systems. Bill Leuenberger, M.S., 2000. (Olafsson).

1999

A Unified Rough and Finish Cut Algorithm for NC Machining of Free Form Pockets Using a Grid Based Approach. Yong-Hoon Choi, M.S., 1999. (Narayanaswami).

Setup Reduction in Printed Circuit Board Assembly. Krishnan Vivekan Iyengar, M.S., 1999. (Narayanaswami).

Usable Web Based Simulated Annealing and Tabu Search for the Facility Layout Problem. Hong-In Cheng, M.S., 1999. (Patterson).

Object Recognition in Computer Aided Design: A Case Study in Pro/Engineer. Yicun Zheng, M.S., 1999. (Narayanaswami).

A Simulation Study of International Collaboration Between Retailers and Producers Via Joint Pricing and Order Quantity Decision. Deddy K. Priatmodjo, M.S., 1999. (Olafsson).

1998

On-Line Condition Monitoring System at Ft. Calhoun Nuclear Station. Ravi Konkimalla, M.S., 1998. (Heising).

Predictive Maintenance of Anti Reverse Rotation Device Using SPC Tools at Ft. Calhoun Nuclear Power Plant. Abhay Bhootra, M.S., 1998. (Heising).

Analysis of Multiple Load Automated Guided Vehicle Systems. Eka Yonatan, M.S., 1998. (Egbelu).

Operation of a Storage/Retrieval (S/R) System With Loads Relocation Consideration. Jaeyeon Won, M.S., 1998. (Egbelu).

The Impact of Surface Errors on Location and Orientation of a Workpiece Fixtured in Datum Locators. Supapan Sangnui, M.S., 1998. (Peters).

A Tabu Search Approach to JIT Scheduling of Flow Shops That Include Exceptional Machine Routing Jobs. Navadon Sortrakul, M.S., 1998. (Van Voorhis).

Analysis of Independent Rotary Rack Carousel System. Heedong Kim, M.S., 1998. (Egbelu).

Multiple Resources Constrained Multiple Projects. Seong-Ryong Kim, M.S., 1998. (Gemmill).

Data Collection for Vibration Analysis of Production Assemblies. Joseph Murray, M.S., 1998. (Jackman).

Generation Expansion Models for Electric Utilities Under Competition. Pazhayanur Shanmukham Subramaniam, M.S., 1998. (Min).

Determination of Vehicle Requirements in Automated Guided Vehicle Systems. Robert Arifin, M.S., 1998. (Egbelu).

Charge-Discharge Capacity School Bus Routing and Scheduling Problem with Time Windows Using Tabu Search. Pongchai Athikomrattanakul, M.S., 1998. (Van Voorhis).

A Fuzzy Logic Approach to Detect Tool Breakage Using a Dynamometer. Po-Tsang Huang, M.S., 1998. (Even/Chen).

Design of Flexible Guide Paths for Automated Guided Vehicle Systems Using the Genetic Algorithm. Wanida Kananam, M.S., 1998. (Gemmill).

Machined Volume Decomposition and Feature Recognition of Compound Non-Orthogonal Features. Shashi Bushan Pavuluri, M.S., 1998. (Salisbury).

Concurrent Engineering of a Curing Process for Composites: Carbon/Epoxy Woven Fabric Hollow Cylindrical Tube. Ruei-Ching Teng, M.S., 1998. (Even).

1997

Non-Constant Parameter Tool Path Generation for 5-Axis Milling of Sculptured Surfaces Using a Toroidal End Mill. Amitabh Khare, M.S., 1997. (Salisbury).

Deterministic Look-Ahead Horizons in Simulation-Based Real-Time Scheduling of an FMS. Yi-Chiuan Lai, M.S., 1997. (Gemmill).

Application of Statistical Techniques in Assisting Maintenance Activities at the Neal South Fossil Power Plant. Anand Vaidyanathan, M.S., 1997. (Heising).

Seasonal Variation Analysis of the Reactor Coolant System at the Ft. Calhoun Nuclear Power Plant. Deepak Srinivas, M.S., 1997. (Heising).

Design of a Zone-Based Tandem Layout for Automated Guided Vehicle Systems. Wooyeon Yu, M.S., 1997. (Egbelu).

Concurrent Engineering of Bolt Assemblies. Pari Natarajan, M.S., 1997. (Jackman).

Optimal Inventory Policies Under Decreasing Cost Functions Via Geometric Programming. Hoon Jung, M.S., 1997. (Min).

New Performance Measures on a Two-Machine Flowshop Scheduling. Denny Charlie, M.S., 1997. (David).

Improving Constraint-Based Scheduling with Look Ahead Techniques. Michelle Edwards, M.S., 1997. (Gemmill).

Capital Budgeting for Utilities with Hard-to-Quantify Factors Via Analytic Hierarchy Process. Hyung-Jin Son, M.S., 1997. (Min).

An In-Process Surface Recognition System for End-Milling Cutting Process. Yu-Hsuan Tsai, M.S., 1997. (Berger & Chen).

Improved Methods of Assembly Sequence Determination for Automatic Assembly Systems. Hyoung-Ro Lee, M.S., 1997. (Gemmill).

An Integrated Resource Planning Model for Utilities with Quantified Outage Costs. Chung-Hsiao Wang, M.S., 1997. (Min).

Statistical Control of Reactor Coolant Pump System at Ft. Calhoun Nuclear Power Plant. Bimal Patel, M.S., 1997. (Heising).

1996

A System Analysis for the Establishment of Collection, Transportation and Processing of Post Consumer High Density Polyethylene Plastics for Taiwan, Republic of China. Wei-Chin Chuang, M.S., 1996. (Even).

Solving Multi Depot Vehicle Routing Problem for Iowa Recycled Paper by Tabu Search Heuristic. Supachai Pathumnakul, M.S., 1996. (Even). An Implementable Strategy Combining QFD, DOE, and SPC for Optimization and Variation Reduction in Quality. R. Swaminathan, M.S., 1996. (Berger).

Interactive Planning of Dynamic Service Network Using a Graphical Interface. Xiaoling Jiang, M.S., 1996. (Cheung).

Implementing Statistical Techniques in Coal-Fired Power Plants. Manoj P. Mirpuri, M.S., 1996. (Heising).

A Smart Sensor for Tool Breakage Detection System for End-Milling Cutting Process. Wei-Liang Chen, M.S., 1996. (Gemmill & Chen).

Resource Constrained Project Scheduling Using Simulated Annealing and Tabu Search. Ying-Wei Tsai, M.S., 1996. (Gemmill).

Analysis and Optimization of a Single Buffer Polling System. Rusdy Alie, M.S., 1996. (Gemmill).

Neural Network Approaches for Selected Optimization Problems. Jia-Jen Chang, M.S., 1996. (Barta).

Conceptual Design of a Water Production System From Atmospheric Humidity. Daniel DaGraca, M.S., 1996. (Scrutton).

The Fuzzy-Nets Approach for Controlling a Nonlinear System and Detecting Tool Breakage. Kuo-Cheng Ko, M.S., 1996. (Berger).

Optimizing the Fuzzy-Nets Training Scheme Using the Taguchi Parameter Design. Nan-Hui Lin, M.S., 1996. (Scrutton).

Performing a Capability Analysis on Holes Drilled with Standard High Speed Steel Drill Bits. Kimberley Lynn Crouch Mertz, M.S., 1996. (Heising).

Prediction of Joint Dynamics From Electromyography Signals Using Artificial Neural Networks. Pei-Shin Shih, M.S., 1996. (Patterson).

Multi-Stage Production Line Systems with Deterministic Service Times and Poisson Input. Masataka Tsuyama, M.S., 1996. (David).

A Flexible Model for Cost Justification of ISO 9000 Implementation. David Ward, M.S., 1996. (Gemmill).

1995

Study of Hole Cylindricity and Surface Finish in Circular End Milling Using Designed Experiment. Sarat Agarwala, M.S., 1995. (Heising).

A Case Based Reasoning System for Housing Discrimination. Srinivasa V. Thirumalai-Anandanpillai, M.S., 1995. (Barta).

A Theory of Constraints Approach to Product Development Using Quality Function Deployment. Vivek Venugopal, M.S., 1995. (Heising).

Evaluation of Modeling Techniques for Nonlinear Dynamic Processes. Patricia Smith, M.S., 1995. (Meeks).

Optimal Inventory and Pricing Models Under Variable Setup Costs: A Geometric Programming Approach. Djoko Soesilo, M.S., 1995. (Min).

Quality Function Deployment and the Axiomatic Approach: A New Approach to Concurrent Engineering. Pravin Tampi, M.S., 1995. (Berger).

1994

A Comparison of Optimization Algorithms Applied to a Simulation Model of an Existing Asynchronous Automated Assembly System. Cathy Treichel, M.S., 1994. (Gemmill).

Evaluation of Modified Simulated Annealing Heuristics for Stochastic Optimization of an Automatic Assembly System. Joaquim Antao, M.S., 1994. (Gemmill).

Searching for a Minimal Cost of Closed-Loop Automatic Assembly System with the Genetic Algorithm. Yisheng Hsiao, M.S., 1994. (Gemmill).

An Expert System for Utilizing Artificial Neural Networks. Matthew Reid, M.S., 1994. (Bartlett).

Conveyor Implementation Methodologies in Computer Simulation. Anbu Sivaprakasam, M.S., 1994. (Gemmill).

Scheduling a Two-Machine Flowshop with Travel Times to Minimize Maximum Lateness. John Stevens, M.S., 1994. (Gemmill).

Comparison of Mixed-Model Sequencing in Just-in-Time Production Systems. Cheng-Kung Wu, M.S., 1994. (Gemmill).

A Complete Valuation Model for Mortgage-Backed Securities: Option-Adjusted Spread, Duration, and Convexity. Byron D. Carson, M.S., 1994. (McBeth).

Determining Fabrication Orientations for Rapid Prototyping with Sterolithography. Po-Ting Lan, M.S., 1994. (Gemmill).

Stochastic Optimization of a Manufacturing System Using a Knowledge Base. Wai Siang Lim, M.S., 1994. (Gemmill).

Two Resource Allocation Studies for Decision Makers: A One-Time Only Sale Model for Lot-Size Buyers and a Repair Unit Location Model for Electric Power Failures. Ming-Jong Yao, M.S., 1994. (Min).

1993

Global Visibility Computation for Automated Machining. Fay Gau, M.S., 1993. (Chen).

Design of an Information System for Planning and Decision Making in the Marketing of Recyclable Materials. Sharad Gupta, M.S., 1993. (Adams).

The Scheduling of Drivers in a Capacitated Vehicle System for a Two-Way Commuter Club. Jeffrey LaMar, M.S., 1993. (Gemmill).

Liaison Extraction Algorithm for Assembly Sequence Generation from a Solid Model. Hunszu Liu, M.S., 1993. (Linn).

Software Reliability Modeling with Imperfect Debugging and Multiple Error Types. Thomas Lynch, M.S., 1993. (Kuo).

Determination of Optimal Manufacturing Sequence in Discrete Part Manufacturing. Sukanta Mishra, M.S., 1993. (Linn).

Total Quality Management in Hospitals of the United States: The Correlation of Various Factors to a Measure of Success. MichaelParish, M.S., 1993. (Gemmill).

Functional Evaluation of Kinematically-Driven Mechanical Systems. Mukund Srinivasan, M.S., 1993. (Jackman).

On Determining Mold Partitions for Swept Tubes. Ming-En Wang, M.S., 1993. (Chen).

Dynamic Priority Rules for Cyclic Queues with Limited Service Regime. Onur Yalcin, M.S., 1993. (McBeth).

Process Capability Evaluation of Fine-Pitch SMC Placement in SMT for PCB Production. Chi-Hao Yeh, M.S., 1993. (Linn).

Auxiliary Equipment Allocation in Flexible Manufacturing Systems. Sabri Tankut Atan, M.S., 1993. (Pandit).

Market-based Pricing Strategies for Lot-Size Producers and Electric Power Suppliers. Cheng-Kang Chen, M.S., 1993. (Min).

Tandem Application of a Genetic Algorithm and Stochastic Quasigradient Method to the Optimization of an Assembly System. Kraig Alan Downs, M.S., 1993. (Gemmill).Command Control and Communication Information Network Analysis Tool (C3INAT) (Modeling and Analysis). Srinagesh Gavirneni, M.S., 1993. (Kuo).A Similarity Coefficient-based "Reverse" Algorithm for Establishing Machine Cells with Size Limitations. Charles Geoffrey Knox, M.S., 1993. (Gemmill).

A 3/R/T Zero-One Integer Linear Model for the Collection of Recyclable Materials in Rural Areas. Ilhan Tan, M.S., 1993. (Even).

Stochastic Optimization in the Design for Flexible Manufacturing Systems: A Simulated Annealing Versus Stochastic Quasigradient. Han-Chung Wang, M.S., 1993. (Gemmill).

1992

Modeling and Machining of Compound Surface with Blending. Mei-Chu Cheng, M.S., 1992. (Trappey).

The Integration of Modular Fixture Database, Fixture Positioning Algorithms, and 3-D Fixture Planning Interface. Shih-Huai Huang, M.S., 1992. (Trappey).

Functionality Based Design for Airblast Atomization. Mark Pelzer, M.S., 1992. (Jackman).

A Bayesian Approach to Design Project Scheduling. Debra Bishop, M.S., 1992. (Jackman).

Design of a Query System and Consistency Checker for Expert System Maintenance Using an Intelligent Database. Salim Chandani, M.S., 1992. (Barta).

Mission Effectiveness Simulation for Human/Machine Systems. Fen-Hui Lin, M.S., 1992. (Kuo).

Routing and Scheduling of Trucks to Minimize the Cost of Collection of Post-Consumer Recyclable Products. B. Muralidharan, M.S., 1992. (Pandit).

Automatic Precedence Relationship Extraction for Assembly Sequence Generation. Hung-Yi Tu, M.S., 1992. (Linn).

A Solution for Fixture Configuration Using Projective Geometry. Shankaran Matrubhutam, M.S., 1992. (Trappey).

1991

Pricing Allocation Priority and Specification Level of Products with Upper Limit on the Number of Shortages. Peitsang Wu, M.S., 1991. (Min).

Object-Oriented Programming and Evolutionary Heuristic Solutions in the Context of the Line Balancing Problem. Michael Kugel, M.S., 1991. (Barta).

Application of Statistical Experiment Design to the Command Control and Communication Information Network Analysis Tool (C3INAT). Jason Rupe, M.S., 1991. (Kuo). Performance Analysis of a Stochastic Recirculating Conveyor. Linda Geier, M.S., 1991. (Jackman).

A Study of JIT Implementation Technique Using the Analytic Hierarchy Process Model. Sutthira Thanyavanich, M.S., 1991. (Tamashunas).

Stochastic Optimization of Cost of Automatic Assembly System. Elly Tandiono, M.S., 1991. (Gemmill).

Assembly System Selection in a Conceptual Manufacturing System Design Model. Hsiu-Chen Wu, M.S., 1991. (Gemmill).

Reduction of Bottleneck Operations in Just-In-Time Manufacturing. Shehzad Ahmed, M.S., 1991. (Tamashunas).

Concurrent Engineering in the Design of a Lateral Pressure Soil Blade. Don Eichner, M.S., 1991. (Even).

Optimal Pricing Using NLP: The Case of a Veterinary Diagnostic Laboratory. Gautam Jain, M.S., 1991. (Kuo).

Simulated Annealing Algorithm Applied in the Flexible Manufacturing Systems Design. Laurensius Lie, M.S., 1991. (Gemmill). Use of the Moment Ratio Criteria to Identify Property Mortality Dispersion. Rislima Febriani Sitompul, M.S., 1991. (Cowles).

1990

The Comparison of the Declining Operation Return Models for Industrial Property Valuation. Jirong Lu, M.S., 1990. (Cowles).

An Interactive Microcomputer-Aided Instruction Methodology and Development in the Engineering Curriculum. Andreas A. Hess, M.S., 1990. (Even).

Experimental Design of a Manufacturing System in the Concurrent Engineering Environment. Lee Allen Shervheim, M.S., 1990. (Gemmill).

A Method of Industrial Plant Layout and Material Flow Analysis in AutoCAD. David Paul Sly, M.S., 1990. (Tamashunas).

A Feature-Based System Specification Model for Manufacturing Systems. Chris S. Wagner, M.S., 1990. (Jackman).

Economic Analysis in the Context of Incomplete Knowledge: Sensitivity Implications. Kenneth W. Chihak, M.S., 1990. (Montag).

A Three-Dimensional Structure to Solve the Hypertext Disorientation Problem. Ren-Jieh Kuo, M.S., 1990. (Barta).

1989

Computer Aided Response Surface Modeling. Taihung Yang, M.S., 1989. (Berger).

An Expert System Based Automatic Control Software Generator for the Programmable Logic Controller. Sangeeta Bhatnagar, M.S., 1989. (Volume I and II). (Linn).

Computer Aided Process Planning for Automated Printed Circuit Board Assembly. Ismail Emmanuel Yohannes Chamdani, M.S., 1989. (Linn).

Petri Net Representation of Relay Ladder Logic for Programmable Controllers. Douglas K. Hyde, M.S., 1989. (Jackman).

Strategies for Implementing the Just In Time Manufacturing Concepts. Sarah Frances Davies, M.S., 1989. (Tamashunas).

1988

Analysis of an Adaptive Geometric Moving Average Technique for Control of Metal Cutting Operations. Peter Doyle Cyr, M.S., 1988. (Berger).

A Microcomputer Simulation Program to Compare Mutually Exclusive Alternatives Under Risk. Daniel Benjamin Kostka, M.S., 1988. (Tamashunas).

Software Issues in the Design and Specification of a C3I Analysis System. Keith A. Johnson, M.S., 1988. (Kuo).

Planning of Order Release and Capacity Control by Means of a Lead-Time-Oriented Manufacturing System. Joo-Yong Kim, M.S., 1988. (Tamashunas).

A Study of Persistence Among Undergraduate Women Engineering Students. Mary Ann Evans, M.S., 1988. (C. Smith).

Optimization for Deterministic Line Balancing Problem With Unscheduled Downtimes. Atul V. Amin, M.S., 1988. (Tamashunas).

Investigation of Certain Properties of Present Worth and Rate of Return Methods of Analysis. Jyh-Jeng Deng, M.S., 1988. (Montag).

A Micro-Computer Based Vision System for Quality Control of Finished Parts. Kheng Joo Heng, M.S., 1988. (Even).

The Development and Evaluation of a Graphics Preprocessor for GPSS on AutoCAD. Jihad A.H. Labban, M.S., 1988. (McRoberts).

The Taguchi Methods of Quality Control Examined: With Reference to Sundstrand-Sauer. Cheryl Lynn Moller-Wong, M.S., 1988. (Tamashunas).

Productivity Measurements of Information Services. Keith W. Larson, M.S., l988. (Tamashunas).

1987

A Comparison of Graphic Versus Tabular Output Presentation in the Analysis of Simulation Results. Kimberly K. Lehmkuhl, M.S., l987. (Patterson).

A Quantitative Comparison of Heuristic Approaches for Solving Mixed-Integer Type Reliability Optimization Problems. Zhongkai Xu, M.S., 1987. (Kuo).

A Standardized Control Language for Two Different Robotic Manipulators. Shyhshin Bob Chen, M.S., 1987. (Malstrom).

1986

A Practical Heuristic Scheduling Algorithm for a Multi-Stage/Multi-Processor Flow-Shop Problem with Numerous Technological Constraints. Jon D. Yanney, M.S., l986. (Kuo).

Optimization of a Machine Maintenance Policy Through Queueing Modeling, Computer Simulation, and Heuristics. Victoria L. Schluter, M.S., l986. (Kuo).

The Impacts of Property Life Cycles on Depreciation Requirements. Weipen Tsai, M.S., l986. (Cowles).

The Development, Implementation, and Analysis of a Pallet-loading Algorithm with a Robotic Simulator. Joseph R. Fleming. M.S., l986. (Malstrom).

Development of an Organizational Climate Instrument for Latin American Countries. Luis Javier Botero-Arang, M.S., l986. (Patterson).

Forecasting Capital Funding Necessary to Meet Equipment Replacement Requirements in Hospitals. Douglas D. Gemmill, M.S., l986. (Jensen).

A Method of Plant Layout Evaluation Using AutoCAD. Athanasios Giavropoulos, M.S., l986. (Tamashunas).

An Application of the Mathematical Programming to a Large-Scale Production System. Mingjian Zuo, M.S., l986. (Kuo).

An Investigation of the Statistical Aging (STAGE) Model. Youh-Jyun Lin, M.S., l986. (Jensen).

Applications of Spreadsheet in Linear and Integer Programming. Yar-Lin Kuo, M.S., l986. (Kuo).

The Application, Justification and a Planning Procedure for Flexible Manufacturing Systems. Ali J. Ibrahim. M.S., l986. (Even).

Computer-aided Estimation of Selected Industrial Operational Times. Samer H. Kayyali, M.S., l986. (Tamashunas).

Enhanced Simulation Output Through the Use of Spreadsheet Software. John P. Dieltz, M.S., l986. (Barta).

Estimating Manufacturing Work Cell Productivity Using Digital Simulation Techniques. C. Dennis Alexander, M.S., l986. (Even).

1985

Implementation of Iowa Legislation Controlling Asbestos Removal: A Cost Model. Tracy Lynn Rector, M.S., l985. (Tamashunas).

Automated Material Handling Simulation Program for AGVS. Chia-Fen Lee, M.S., l985. (Tamashunas).

Sensitivity Analysis in Linear Goal Programming. Noel Artiles-Leon, M.S., l985. (Meeks).

A Microcomputer-Based Binary Vision System. Volker Petersen, M.S., l985. (Even).

A System of Animated Graphics for the Micro-Computer Simulation of Industrial Processes. Sen-Der Huang, M.S., l985. (Barta).

Using Digital Simulation in the Analysis of FMS Scheduling Rules. Jeoung Sung Cho, M.S., l985. (Barta).

Burn-in Optimization by a Direct Pattern Search Technique. Donghae Chi, M.S., l985. (Kuo).

A Position Accuracy Measurement Model for a Miniature Robotic Manipulator. Nancy Perry, M.S., l985. (Malstrom).

The Development of a Miniature Two-arm Robotic Manipulator System. Mahmoud Tabatabaiepur, M.S., l985. (Malstrom). The Application of a Manufacturing Cost Recovery Method in a Health Care Facility. David R. Kading, M.S., l985. (Malstrom).

Application of Queueing Theory to Maintenance Problems. Weixing Zhang, M.S., l985. (Tamashunas).

A Production System Analysis: Seedling Sorting and Material Handling Process. Mark A. Titus, M.S., l985. (McRoberts).

The Weibull Distribution as an Estimator of Generalized Survivor Curves. Hyun Seung Oh, M.S., l985. (Cowles).

1984

An Evaluation of Twelve Single-Level Discrete Demand Lot-Sizing Heuristics. Brian Heemsbergen, M.S., l984. (Malstrom).

How FORTH May be Used to Implement an EIA Standard CNC Language, Demonstrated by Means of a Small, Micro-computer-Controlled Vertical Mill. John Mullen, M.S., l984. (Berger).

Comparison of Five Database Management Systems for Microcomputers. Hsin-Hui Lin, M.S., l984. (Berger).

Evaluation of Information System Impact on Nursing Performance. Thomas Mark Jacobson, M.S., l984. (McRoberts).

The Use of a Robotic Manipulator to Unitize Pallet Loads in a Warehouse Distribution System. Du-Ming Russell Tsai, M.S., l984. (Malstrom).

The Development and Analysis of FORARM: A FORTH Based Robotics Programming System. Steven L. Lidke, M.S., l984. (Malstrom).

SAMPAC: An Analysis Package for Attributes Acceptance Sampling Plans. Blake Randall Abdella, M.S., l984. (Statistics, Vardeman; IE, Malstrom).

Application of Pareto's Law to Industrial Engineering Technology. Mohammad Shakilur Rahman, M.S., l984. (Tamashunas).

Critical Path Method with Crash Time Scheduling: A Computer Program. Qamar Ashraf Nomani, M.S., l984. (Tamashunas).

A Cost-Utilization Analysis of the Computational Lab for Engineering Fundamentals at Iowa State University. Marcia Rae Rector, M.S., l984. (Smith).

Development of a New Plant Layout Technique Using Volume-routing Analysis. Tariq Manzoor, M.S., l984. (Tamashunas).

1983

Sensitivity Analysis of a Probabilistic Inventory Model Using True, Average Inventory Levels. Sue Osier, M.S., l983. (Malstrom).

IMSIP: Interactive Material Handling Simulation Program. Wayne A. Vande Wall, M.S., 1983. (Barta).

Determination of Criteria for Selection of a Scheduling Model. Shaukat Ali Brah, M.S., 1983. (Tamashunas).

Finding Nonnegative Internal Rates of Return for Given Sets of Cash Flows. Daniel L. Mohr, M.S., 1983. (G. Smith).

The Development of an Integrated Material Management System for Chargeable Medical Supplies in a Health Care Facility. Dennis J. Van Liew, Jr., 1983. (Malstrom).

Quantifying the Financial Benefits of Automatic Data Collection in Small Retail Business. David Schmid, M.S., 1983. (Even).

A Facility Layout Program Using Computer Graphics. Ron Ketcham, M.S., 1983. (Malstrom).

Lot Size Variation With Weighted Average Inventory Levels Under Constraints of Stockouts and Discrete Probabilistic Lead Time Variation. Shih-Ming Lee, M.S., 1983. (Malstrom).

Study of Weighting Methods of Retirement Ratios. Ilgeon Yoo, M.S., 1983. (Cowles).

Simulation of Work-in-Process Inventory as a Tool in Facilities Design. George Abdou, M.S., 1983. (Tamashunas).

Criteria for Re-Evaluation of a Process Type Plant Layout. Mohammad Elhamul Huq, M.S., 1983. (Tamashunas).

1982

Evaluation of Gripping Effectiveness and Motion Economy on Standard Geometric Shapes Using a Table-Top Robotic Arm Manipulator. Henry Steven Schafer, M.S., 1982. (Malstrom).

Computerized Analysis of Nursery Inventory Data. Daniel A. Garst, M.S., 1982.

The Development and Evaluation of a Management Information System for Work Progress Functions. Gaillard Graban, M.S., 1982. (Malstrom).

Physical Modeling to Investigate the Effects of Machine/Component Breakdowns in an Automated Flexible Manufacturing System. Kurt Diesch, M.S., 1982. (Malstrom).

1981

Comparative Evaluation of Grouping Methods in Group Technology. Pradip Balkrishna Trivedi, M.S., 1981. (Classen).

Replacement Models With Inflation. Bradley C. Meyer, M.S., 1981. (G. Smith).

Evaluation of Lot-Sizing Alternatives with Multi-Echelon Inventory Systems. Hoo-Gon Choi, M.S., 1981. (Malstrom).

1980

Analysis of Capacity Requirements in Cellular Manufacturing. Ranendra Kilmar Chakravorty, M.S., 1980. (McRoberts).

1979

Analysis of Loading Strategies and Processing Times on Capacity Utilization and Job Shop Queues - A Simulation Approach. Apurba Dutta, M.S., 1979. (McRoberts).

Group Technology Approach to Manufacture and Layout. Frank N. Igwilo, M.S., 1979. (Tamashunas).

Managing Personnel in Multinational Corporations. Paul Daemen, M.S., 1979.

1978

Economic Evaluation of Two Existing HVAC Systems for a Hospital Operating Room. Pankaj Shah, M.S., 1978. (Montag).

1977

Requirements Analysis in Management Information System Design. Raymond Blom, M.S., 1977. (Berger).

A Product Liability Cost Model. Henry L. K. Chu, M.S., 1977. (Vaughn).

1976

Capital Budgeting Simulation: A Heuristic Approach. James Stuart Thomson, M.S., 1976. (G. Smith).

Prediction of Admissions and Discharges for Mercy Hospital Using Multiple Regression Procedures. Thomas Warren Long, M.S., 1976. (McRoberts).

Chance-Constrained Programming Assuming a Finite Range on the Random Variables. David William Poock, M.S., 1976. (Meeks).

A Systems Approach to the Analysis of Tree Production for Conservation. Kalaiah Kariappa Puliyanda, M.S., 1976. (McRoberts).

1975

Application of Technological Forecasting to Water Resource Planning. Alan Michael Behrens, M.S., 1975.

Maintenance Aspects of a Research Equipment Management Program. John Kenneth Peterson, M.S., 1975. (Even).

1974

A Parametric Decomposition of Geometric Programs. John Mark Trzeciak, M.S., 1974. (McRoberts, Sposito).

Visual Work Measurement. Le Van Tran, M.S., 1974. (Kleinschmidt).

Stochastic Delay in Stop-Go Networks. Harry Michael Bonezkowski, M.S. 1974. (David).

CPM Scheduling Costs Analysis Under the House-Building Project. Dong UK Kim, M.S., 1974. (Even).

1973

A Study of Bus Transportation at Iowa State University. Oscar R. Harasic, M.S., 1973.

Effects of the Operating Parameters of the Rubber Roller Sheller. Mofazzal H. Chowdhury, M.S., 1973.

A Decision Model for the Plant Layout Problem Involving Intermediate Relayout Possibilities. Badruddin Zakiuddin Karachiwala, M.S., 1973. (McRoberts).

Analysis of a Signalized System of Traffic Intersections by Digital Simulation. Raymond Earl Stanley, M.S., 1973. (McRoberts).

A Statistical Model for a Signalized Intersection. Wai Wo Wong, M.S., 1973. (David, McRoberts).

1972

Production Control System in Sheetmetal Works. Almoez Eltouny, M.S., 1972. (Kleinschmidt).

A Heuristic Solution to the General Job Shop Scheduling Problem. Hee Man Bae, M.S., 1972. (McRoberts).

A Heuristic Programming Algorithm for Warehouse Location Problems. Stephen Arthur Orum, M.S., 1972. (McRoberts).

An Economic Study of Central Repositories as a Solution to the Abandoned Automobile Problem. Thomas H. Howell, M.S., 1972. (Even).

1971

A Methodology for the Allocation and Scheduling of State Policement. Billie Ray Wilson, M.S., 1971. (McRoberts).

Graphic Selection of an Optimal Depreciation Method. Richard D. Chartier, M.S., 1971. (G. Smith).

A Simulation Analysis of a Dynamic System. Bradley Kent McKeown, M.S., 1971. (McRoberts).

Comparison of Materials Handling Systems by Use of Computerized Plant Layout Techniques and Extreme Value Analysis. Dominick John Leo, M.S., 1971. (McRoberts).

A Comparison of Acturarial and Simulated Plant-Record Methods of Property Account Analysis. Herbert Carl Erbe, M.S. 1971. (Cowles).

Development of a Policy for Economic Replacement of Military Administrative Fleet Vehicles. Gary L. Flack, M.S., 1971. (McRoberts).

Economic Considerations of Recycling Automobile Hulks in Central Iowa. James Robert Black, M.S., 1971. (Even).

1970

Investment Analysis by Analog Computer. Burnell Nelsen, M.S., 1970.

Corporate Earnings and Optimal Debt Ratio. Satender Sharma, M.S., 1970. (G. Smith).

1969

Technicians in Pharmacy. Kenneth Scott Mericle, M.S., 1969.

An Investigation of an Interchangeable Part Production System Subjected to Different Priority Disciplines. Ashok Ramakrishna Pai, M.S., 1969.

Administrative and Economics Aspects of Interconnecting the Water Systems of the City of Ames and Iowa State University. Ajva Taulananda, M.S., 1969. (G. Smith).

A Computerized Model for the Analysis of Corporate Bond Yields. Charles Kidder, M.S., 1969. (G. Smith).

Analysis of Commitment and Risk: An Engineering Models Approach. Alan W. Petre, M.S., 1969. (G. Smith).

Control Model Simulation: for a Continuous Manufacturing Process. Edwin L. Hullander, M.S., 1969.

An Investigation of an Interchangeable Part Production System Subjected to Different Priority Disciplines. Ashok Ramakrishna Pai, M.S., 1969.

Obsolescence and Technological Change in the Crane-Shovel Industry. Christoper J. Joannides, M.S., 1969. (G. Smith).

1968

A Present Worth Model for Contrasting Results from Alternative Group Depreciation Procedures. Jon Franklin Baker, M.S., 1968. (G. Smith).

Materials Handling Choices in India, A Model for Economic Decisions. Ram Singh, M.S., 1968.

1967

Industrial Property Life Analysis with an Analog Computer. Harold Hoover, Jr., M.S., 1967. (Harold Cowles).

A Method of Risk Analysis for Capital Investment Decisions. James Sprague, M.S., 1967. (G. Smith).

1966

A Programmed Manual of Instruction for Value Planning and Control of Engineering Property. Loran Mohr, M.S., 1966.

Management Science Models Applied to Retail Fertilizer Blending Plant Operations. Richard Hoffman, M.S., 1966. (Wayne Moore).

1965

An Evaluation of the Weibull Function as an Estimator of Industrial Property Mortality. J. Michael Scigliano, M.S., 1965.

Forecasting Vocational Training Needs:...Bob Love, M.S., 1965. (Kleinschmidt).

The Weibull Distribution and Industrial Property Mortality Experience. Allen James Henderson, M.S., 1965. (Harold Cowles).

1964

Internal Friction of Sodium Chloride. Gerald Fehr, M.S., 1964.

1962

Applications of a Variable-Channel Queuing Model. David Thompson, M.S., 1962. (Wayne Moore).

Queueing Theory in Highway Construction: Optimizing Reduction of Delays. William Arnwine, M.S., 1962. (J. K. Walkup).

1961

Engineering Valuation Decisions in Iowa and Other States. Daniel Griffen, Jr., M.S. 1961. (Walkup).

1959

Resource Allocation in Project Stages Treated as a Markov Process. John Charles Even, Jr., M.S., 1959.

Industrial Engineering Analysis of Custom Feed Mill Activities. Victor Tamashunas, M.S., 1959. (J. K. Walkup).

1958

Accident Experience by Age Groups in a Large Iowa Utility. Clifford E. Smith, M.S., 1958. (J. K. Walkup).

The Obsolescence Allowance in Equipment Replacement Decisions. Gerald Smith, M.S., 1958. (J. P. Mills).

1957

Classification of Type O Retirement Characteristics of Industrial Property. Frank Van Buskirk Couch, Jr., M.S., 1957. (J. P. Mills).

1956

Valuation Aspects of Industrial Utilization of Iowa Coal. William Roy Park, M.S., 1956. (J. P. Mills).

Influence of Plant Layout on Worker Efficiency. Frederick W. Sherman, Jr., M.S., 1956. (Henry Albers).

1951

Analysis of the Industrial Accident Reporting System in the State of Iowa. Robert Benecke, M.S., 1951. (J. K. Walkup).

1950

A Study of Creamery Operations from an Industrial Engineering Viewpoint. John Frazer, M.S., l950. (J. K. Walkup).

Proposed Techniques for Controlling Running Waste of a Publishing Company. Robert Boeke, M.S., 1950. (J. K. Walkup).

Determination and Consolidation of Management Concepts of Normal Productive Effort in a Small Manufacturing Concern. Eugene Deter, M.S., l950. (J. K. Walkup).

1949

Treatment of Rock Phosphate with Superphosphoric Acid. Jack Mills, M.S., l949.

Measurement of Effect of Composition of Work Cycle Upon Difficulty and Pace of an Operation. Lyell Henry, M.S., l949.

1939

The Influence of Growth on the Conditions Per Cents of Physical Properties. W. C. Fitch. M.S., l939. (Anson Marston).